Romanoff Blue Lo-Shrink Rubber Redi-Cuts: 5 lb Box

When your molds need to be just right!

Romanoff Blue Lo-Shrink Rubber is preferred by many craftsmen all over the world for its low shrinkage properties, excellent tear strength, ability to accurately capture fine detail, and excellent memory. It's very forgiving and is not temperature sensitive as with other low-shrinkage products.

New Romanoff Dark Blue Lo-Shrink has similar qualities to the Original Formula, except it is slightly firmer. It can be used alone or in conjunction with any other brand of mold rubber, keeping shrinkage and cost to a minimum. (If you are using Blue Lo-Shrink in combination with other rubbers, place the Blue Lo-Shrink around the model and the standard mold rubber around the outside of the mold.)

Hot quenching Romanoff Blue Lo-Shrink rubber molds in cold water will produce shrinkage, always allow your standard or Romanoff Blue Lo-Shrink molds to cool off at room temperature.

Dimensions:

• 2 7/8" x 1 7/8" Redi-Cut

Vulcanization Details:

• Vulcanize at 310°F (155°C) for 15 minutes per 1/4" (6mm)
• For an even lower shrinkage rate, vulcanize at 290°F (143°C) for 24 minutes per 1/4" (6mm)